# -*- text -*-
#
# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
#                         University Research and Technology
#                         Corporation.  All rights reserved.
# Copyright (c) 2004-2005 The University of Tennessee and The University
#                         of Tennessee Research Foundation.  All rights
#                         reserved.
# Copyright (c) 2004-2005 High Performance Computing Center Stuttgart,
#                         University of Stuttgart.  All rights reserved.
# Copyright (c) 2004-2005 The Regents of the University of California.
#                         All rights reserved.
# Copyright (c) 2012      Cisco Systems, Inc.  All rights reserved.
# Copyright (c) 2017-2020 Intel, Inc.  All rights reserved.
# Copyright (c) 2022-2025 Nanook Consulting  All rights reserved.
# $COPYRIGHT$
#
# Additional copyrights may follow
#
# $HEADER$
#
# This is the US/English help file for palloc
#
[usage]
%s (%s) %s

Usage: %s [OPTION]...
PMIx Allocation Request tool


/*****      General Options      *****/

-h|--help                            This help message
-h|--help <arg0>                     Help for the specified option
-v|--verbose                         Enable typical debug options
-V|--version                         Print version and exit
   --pmixmca <arg0> <arg1>           Set MCA parameter value

   --uri <arg0>                      Specify the URI of the server to which we are to connect, or
                                     the name of the file (specified as file:filename) that contains that info
   --namespace <arg0>                Namespace of the daemon to which we should connect
   --nspace <arg0>                   Synonym for "namespace"
   --pid <arg0>                      PID of the daemon to which we should connect (int => PID or file:<file>
                                     for file containing the PID
   --system-server-first             First look for a system server and connect to it if found
   --system-server-only              Connect only to a system-level server
   --system-controller               Connect to the system controller
   --tmpdir <arg0>                   Set the root for the session directory tree
   --connect-order <arg0>            Specify search order for server connections - e.g., scheduler,
                                     system controller, system-level server, or local server
   --wait-to-connect <arg0>          Delay specified number of seconds before trying to connect
   --num-connect-retries <arg0>      Max number of times to try to connect

   --request-id <arg0>               String identifier for this allocation request
-q|--queue <arg0>                    Scheduler queue this request should be passed to for processing
-N|--nodes <arg0>                    Number of nodes to be allocated
-i|--image <arg0>                    OS image to be provisioned on allocated nodes prior to initiating
                                     execution of specified job, or turning nodes over to an interactive
                                     session
-x|--exclude <arg0>                  Comma-delimited list of nodes that are to be excluded from
                                     consideration for scheduling this allocation
   --wait-all-nodes                  Wait for all nodes to be ready before starting execution of the
                                     specified job.
-w|--nodelist <arg0>                 Comma-delimited list of ranges of specific nodes being requested
                                     [e.g., host0[1-5],host128]. Can also pass the argument as a filename
                                     using the "file:<path>" syntax. Ordering of names and/or duplicate
                                     names are ignored.
   --uid <arg0>                      Assign the resulting allocation to the specified user ID
   --gid <arg0>                      Assign the resulting allocation to the specified group ID
-t|--time <arg0>                     Time limit on the assigned allocation.
   --signal <arg0>[@arg1]            Send all processes executing within the allocated session the specified signal
                                     when it reaches the (optional) specified seconds of its end time.
-s|--share                           Allocated resources can be shared with other allocations.
   --extend   <arg0>                 Extend the specified existing session ID per the rest of the given request.
   --shrink <arg0>                   Shrink the specified existing session ID per the rest of the given request.
   --no-shell                        Immediately exit after allocating resources, without running a command.
   --begin <arg0>                    Direct the scheduler to defer allocation until the specified time.
-I|--immediate <arg0>                Exit if resources are not available within the time period specified.
-d|--dependency <arg0>               Defer the start of this session until the specified dependencies have successfully
                                     completed.
   --do-not-wait                     Submit the allocation request to the scheduler, but do not wait for the allocation
                                     to be assigned. Intended for use when submitting a job for batch execution.

The command returns the string session ID of the resulting allocation, or if executed with the "do-not-wait" option, the
string session ID of the allocation request as assigned by the scheduler. Any command line arguments following the provided
options are taken as the job script or executable to be run within the allocation (once assigned) and its attendant
argv array. In this case, the allocation will terminate once the provide job script or executable completes.

The user is responsible for free'ing the returned string session ID.

Report bugs to %s
#
[pmixmca]

Pass a PMIx MCA parameter

Syntax: "pmixmca <key> <value>", where "key" is the parameter name
and "value" is the parameter value.


#
[bad-option-input]
%s was given an option that expected a string argument:

  option: %s
  argument: %s
  expected: %s

Please correct the option and try again.
#
[file-open-error]
%s was unable to open the specified file provided as an option:

  option: %s
  argument: %s
  file: %s

Please correct the option and try again.
#
[bad-file]
%s was unable to read the necessary info from the provided file:

  option: %s
  argument: %s
  file: %s

Please correct the option or the file and try again.
#
# CONNECTION OPTIONS
#
#
[uri]
Specify the URI of the DVM master, or the name of the file (specified as
file:filename) that contains that info
#
[num-connect-retries]
Max number of times to try to connect to the specified server (int)
#
[pid]
PID of the daemon to which we should connect (int => PID or file:<file>
for file containing the PID
#
[namespace]
Namespace of the daemon we are to connect to (char*)
#
[nspace]
Namespace of the daemon we are to connect to (char*) - synonym for "namespace"
#
[system-server-first]
First look for a system server and connect to it if found
#
[system-server-only]
Connect only to a system-level server - abort if one is not found
#
[system-controller]
Look for a system controller and connect to it if found
#
[tmpdir]
Define the root location for the session directory tree where the
rendezvous files can be found.

The rendezvous files contain connection information for a target
server and are located in the session directory tree. It may be necessary to point the
tool at the location where those files can be found if that location is other than the
expected default.

The root of the session directory defaults to the system temporary directory
as defined in the environment using (in precedence order) the envars TMPDIR, TEMP, and
finally TMP. In the absence of any of those variables, PMIx will default to the "/tmp"
location.
#
[wait-to-connect]
Delay specified number of seconds before trying to connect
#
[connect-order]
Comma-delimited list of attributes defining the order in which
connections should be attempted, from first to last. If the
final entry is not an "only" flag (e.g., PMIX_CONNECT_TO_SYSTEM),
then connection will default to the local server if no preceding
option succeeds. Thus, the following list:
    PMIX_CONNECT_TO_SCHEDULER
    PMIX_CONNECT_TO_SYS_CONTROLLER
    PMIX_CONNECT_TO_SYSTEM
would first attempt to connect to the scheduler, then the system
controller, and then the local system-level server. If none of those
succeed, then the connection attempt will error out.

However, if the last entry were PMIX_CONNECT_SYSTEM_FIRST, then the
connection procedure would (after failing to connect to a local
system-level server) continue to include an attempt to connect
to any local server that accepted the connection request.
#
#  QALLOC-SPECIFIC OPTIONS
#
[request-id]
String identifier for this allocation request. The request ID can be used for
subsequent query of request status and as a synonym for the eventual session ID
assigned by the scheduler. Note that a request ID that matches a previously
submitted request will be rejected by the scheduler - so care should be taken
to ensure that the ID provided is unique and not previously used.
#
[queue]
Scheduler queue this request should be passed to for processing. Most schedulers
have a number of queues for requests, each queue typically representing a priority
or class of request used in the scheduling process. Users should check the names
of the queues for their system using the "pquery" tool and submit allocation
requests accordingly.
#
[nodes]
The number of nodes to be allocated. In systems where nodes are being subdivided for
allocation (e.g., allocating individual cores or hwthreads), it may be necessary to
provide a more detailed description of the requested resources.
#
[image]
OS image to be provisioned on allocated nodes prior to initiating
execution of specified job, or turning nodes over to an interactive
session. Names of the available images can be obtained using the
"pquery" tool.
#
[exclude]
Comma-delimited list of nodes that are to be excluded from
consideration for scheduling this allocation
#
[wait-all-nodes]
Wait for all nodes to be ready before starting execution of the
specified job.
#
[nodelist]
Comma-delimited list of ranges of specific nodes being requested
[e.g., host0[1-5],host128]. Can also pass the argument as a filename
using the "file:<path>" syntax. Ordering of names and/or duplicate
names are ignored.
#
[uid]
Assign the resulting allocation to the specified user ID. Value
can be provided as either an integer or a username
#
[gid]
Assign the resulting allocation to the specified group ID. Value
can be provided as either an integer or a group name. Typically
used for determining file access permissions and for system
accounting.
#
[time]
Time limit on the assigned allocation.  When the time limit is reached,
each process executing in the session is sent SIGTERM followed by SIGKILL.
The session is then terminated and all resources returned to the
scheduler for reuse. Time is specified in the usual time format of
months:days:hours:minutes:seconds, scanning from right to left (i.e., a
value of "2" equates to 2 seconds)
#
[signal]
When a session is within the specified seconds of its end time, send all
processes executing within it the specified signal. The <arg0> signal may
be a signal number or string name. The optional <arg1> time is taken in
seconds, defaulting to 60 seconds if not specified.
#
[share]
Allocated resources can be shared with other allocations.
#
[extend]
Extend the specified existing session ID per the rest of the given request.
For example, an existing session can have additional nodes allocated to
it, or could have its time limit increased.
#
[shrink]
Shrink the specified existing session ID per the rest of the given request.
For example, an existing session could have a certain number of nodes
removed (returning them to the scheduler for reassignment), or its
time reduced.
#
[no-shell]
Immediately exit after allocating resources, without running a command.
However, the session will still be created and will remain active and own
the allocated resources as long as it is active - i.e., it will be an
active session with an assigned session ID with no job executing within it.
You can submit commands against this resource allocation (e.g., using "prun")
if you specify the appropriate connection identification for this allocation.
Note that the session is subject to the normal constraints on sessions, including
time limits, so that eventually the session will terminate and the resources
will be freed, or you can terminate the session manually using the "pcancel"
command.
#
[begin]
Direct the scheduler to defer allocation until the specified time. Time may be
of the form HH:MM:SS to schedule the session to start at a specific time of day
(seconds are optional). If that time is already past, the next day is assumed.
You may also specify "midnight" or "noon", and you can have a time-of-day suffixed
with AM or PM for running in the morning or the evening. You can also say what
day the session should start by specifying a date of the form MMDDYY or MM/DD/YY
YYYY-MM-DD. Combine date and time using the usual format YYYY-MM-DD[THH:MM[:SS]].
You can also give times like "now + count" time-units, where the time-units can
be "seconds" (default), "minutes", "hours", days, or weeks, or you can ask that
the allocation be made "today" or "tomorrow".
#
[immediate]
Exit if resources are not available within the time period specified. If no argument
is given, resources must be available immediately for the request to succeed. By
default, "immediate" is off, and the command will block until resources become
available. Since this
option's argument is optional, for proper parsing the single
letter option must be followed by an equal sign and the value - e.g., "-I=60"
for a time of 60 seconds or "-I30:00" for a time of 30 minutes.
#
[dependency]
Defer the start of this session until the specified dependencies have successfully
completed. The dependencies are provided as a comma-delimited list of session IDs.
All specified dependencies must be satisfied before the given allocation request
will be scheduled.
#
[do-not-wait]
Submit the allocation request to the scheduler, but do not wait for the allocation
to be assigned. Intended for use when submitting a job for batch execution. Users
should provide a string request ID to enable subsequent queries of request status.
